生物秀旗下生物秀 | 易生物 | 生物秀论坛 | 生物医药词典 | 生物百科 | 生物实验 | 生物秀新闻 | 生物秀知道 | 易生物新闻

Streptavidin-HRP/Biotin Staining: FFPE Tissue

2014-05-17 12:17:36 来源: 浏览次数:0 网友评论 0

[Streptavidin-HRP/Biotin Staining: FFPE Tissue] 实验步骤 1.Deparaffinize and rehydrate the tissue section. Immerse the slide in each reagent for a minimum of 5 minutes.1)Xylene2)Xylene3)100% Ethanol4)100% Ethanol5)95% Ethanol6) 95% Ethanol2.Place the s [FFPE Tissue Streptavidin-HRP Staining Biotin ]

实验步骤

1.Deparaffinize and rehydrate the tissue section. Immerse the slide in each reagent for a minimum of 5 minutes.

1)Xylene

2)Xylene

3)100% Ethanol

4)100% Ethanol

5)95% Ethanol

6) 95% Ethanol

2.Place the slide in Deionized Water (DI). Perform antigen retrieval (see antigen retrieval protocols). If the slide does not require antigen retrieval, then place the slide in DI or wash buffer such as PBST: Phosphate Buffered Saline (1X PBS, pH 7.2 with 0.05% Tween 20) or TBST: Tris Buffered Saline (1X TBS, pH 7.6 with 0.05% Tween 20). Wash the slide twice for three minutes each.

3.Tap off excess buffer and place the slides on the immunostaining tray. Gently dry around the tissue section prior to each incubation. Do not allow the tissue to dry out during the entire immunostaining procedure.

4.Incubate the tissue section with a protein block for 10 minutes. Apply enough reagent to cover the sample. Tap off the protein block; do not wash the slide.

5.Use an appropriate protein block to reduce non-specific binding that may result from hydrophobic or ionic interactions.

6.Incubate the section with an avidin-biotin block. First, incubate with the avidin solution for 10 minutes. Wash the slide twice for three minutes each. Then, incubate with the biotin solution for 10 minutes. Wash the slide twice for three minutes each.

7.Incubate the tissue section with the primary antibody and controls for 30 minutes to 2 hours at room temperature or overnight at 4?C. Adjust the incubation time as needed. Wash the slide twice for three minutes each.

8.Incubate the tissue section with any necessary reagents to block endogenous molecules, such as endogenous peroxidase or phosphatase, with the appropriate blocking reagent(s) for 10 minutes. Wash the slide twice for three minutes each.

9.Each staining system utilizes an enzyme to catalyze the chromogen color development solution. However, the enzyme employed may also be naturally occurring in the tissue specimen. For example, peroxidase is present in red blood cells, muscle, kidney, etc. If utilizing a horse-radish peroxidase enzyme, then block endogenous peroxidase with a hydrogen peroxide solution to prevent non-specific color development.

10. Incubate the tissue section with the corresponding biotinylated secondary antibody for 30 minutes. Refer to the manufacturer's data sheet for additional information. Wash the slides twice for three minutes each.

11.Incubate the tissue section with the streptavidin-peroxidase conjugate for 30 minutes. Refer to the manufacture's data sheet for additional information. Wash the slides twice for three minutes each.

12. Select the correct chromogen, such as DAB (3,3' Diaminobenzidine) with the peroxidase enzyme. Incubate the tissue section with the chromogen for 5-10 minutes. Refer to the chromogen data sheet instructions. Wash the slide with DI for 3-5 minutes.

13. Counterstain the tissue section with hematoxylin for 2-5 minutes. Wash the slide with DI for 3-5 minutes. Rinse with tap water or an alkaline solution to enhance the counterstain.

14. The cell nuclei are generally a purple/blue color after the hematoxylin incubation (low pH) and upon incubation with a basic solution the nuclei turn blue.

15.Dehydrate and clear the tissue section. Refer to the chromogen data sheet. (Some chromogens must air-dry or be dehydrated and cleared faster than usual to prevent chromogen fading)

1) 95% Ethanol, 3 minutes

2)95% Ethanol, 3 minutes

3)100% Ethanol, 3 minutes

4)100% Ethanol, 3 minutes

5)Xylene, 5 minutes

6)Xylene, 5 minutes

16.Coverslip the slide with an appropriate mounting media. Refer to the chromogen data sheet. (The chromogen may require an aqueous or non-aqueous mounting media)

[错误报告] [推荐] [收藏] [打印] [关闭] [返回顶部]

等你回答的问题:

最新文章

 
*×
生物秀论坛—学术交流、资源共享与互助社区!